Clark Beek

Man Abandons Burning Boat to Save His Dog

13 Jul

11694742_929890687068658_1137634705400715462_n
This is the saddest, but most heartwarming, sailing story of the year. Something tells me the sailing community is going to rally around this salty hero (but in the mean time we should respect his wishes and save the questions and Monday morning quarterbacking for later, if ever). It’s all over the news, but here it is in Mr. Kanafoski’s own words, from his public Facebook page:

As im sure you all know by now my boat and everything i owned was on there. i All my tools, clothes, identifications, green cards everything was lost. I left Apalachicola on ...

Read More

Boarding Bummer Off SoCal

10 Jul

Read here for this story from this month’s Latitude 38. It relates to my endless squawking about Coast Guard Boardings, but in this case there’s not much to be said or done: Someone crossing an international border (or its maritime equivalent) has no rights and is open to search. Even on land, the 100-mile border zone is called a “constitution-free zone.” However, on land U.S. Customs and Border Protection, who operate under many of the same laws and exceptions as the Coast Guard, seem to fall under a higher standard of courtesy and accountability, and a delay ...

Read More

Boat Wiring: Distribution Panels and Circuit Protection

9 Jul

IMG_1594
The wiring phase of this project started with re-terminating cables and adding big fuses, then moved into battery switches and distribution. Now we’re into the final leg, which is the main distribution panel.

In the photo above you’ll see what I went with. Most distribution panels in the marine world use breakers, like this:
8084

That’s what I thought I was going to end up with, and the exact one above would have been just peachy, but I ended up going with glass fuses in fuse blocks for a few reasons. First, they’re way cheaper. Second, I’ve already got ...

Read More

Boat Wiring: Battery Switches and Distribution

5 Jun

IMG_0032
Above is what the main cabin ends up looking like when you’re in the middle of a project like this.

In my last installment I covered battery cabling and big circuit protection. Now we’re to the next stops down the line: the battery switches and core distribution.

First, the battery switches. I blogged once before that I like basic battery switches. These big, basic switches from Cole-Hersee have been around for at least sixty years, maybe longer:
2484-06
My boat already had two that were original equipment and still fine, but the threads were stripped on part of one of ...

Read More

Boat Wiring: Reterminating Cables and Adding Big Fuses

28 May

IMG_1488
This is the project that started with a new steering wheel, but I’ve drifted to far from the new steering wheel that I’ve almost forgotten that that’s how I started. There is a running theme to this project run amok and it goes like this: After disassembling things to get done what I needed to get done, the disassembled components were in such sad shape that I couldn’t, in good conscience, put them back. This started with peeling wood veneer, which necessitated rebuilding the entire steering console, and now I’m into the wiring. It’s a bit of a cobblers children ...

Read More

Tragedy At Alabama’s Dauphin Island Race

27 Apr

Apparently a nasty front blew through toward the end of the 57th Dauphin Island Race, while boats were still finishing. Reports say an initial blast of 60 knots was followed by an hour of 30-50 knots. Several boats capsized, leaving several sailors in the water, and several dead and unaccounted for. The Coast Guard has been searching for missing mariners all weekend, and the search continues.

This video, taken in the harbor, gives an idea of what conditions were like:

A firsthand account is here

Full story here and here. ...

Read More

Life Is Too Short to Use Cheap Paint

16 Apr

A wise man once told me this, and I took it to heart.

While traditional enamels are still around, most modern boat paint is linear polyurethane (LP). Among LPs there are one-part products and two-part products. Two-part products cost a little more, but last longer. When you consider that 80-90% of any painting job is prepping, sanding, fairing, and masking, and this is all fairly onerous work, why use paint that won’t last as long?
AwlGrip_Paint - 400perfection

Probably the best known two-part products are Awlgrip and Interlux’s Perfection. If you paint the topsides of your boat with one of these products it ...

Read More

New Steering Wheel Adventure: Part 2

30 Mar

IMG_1439
In Part 1 we discussed how I got myself into this mess in the first place. Now we’re into the heart of the mess. Upon reflection, this is the most serious marine carpentry project I’ve ever got myself into. I’ve taken on some big marine carpentry projects, but they were large areas to be fiberglassed or painted, so there was more room for error. In this project, rebuilding the teak steering console, everything will be varnished and in plain sight, so there is really no room for error: Every joint must be perfect.

The old console was still structurally sound, ...

Read More

More from the AIM Marine Group